聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)的制备与性能

采用熔融酯交换和缩聚两步法,合成了以1,4-丁二醇、4,8-三环[5.2.1.0(2,6)]癸烷二甲醇和碳酸二苯酯为原料的聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)(PBTCx, x为进料中TCD占二元醇总量的百分比)。用1H NMR和13C NMR对PBTCs的微观结构和组成进行了表征。采用GPC、 DSC、 XRD、 TG对PBTCs的分子量、玻璃化转变温度(Tg)、热稳定性等进行了研究。结果表明,PBTCs的Mw为10500~124800 g?mol-1, Mn为6300~73000 g?mol-1, PDI为1.59~1.73; PBTCs呈无定形态、Tg为-3.43 ℃~70.90 ℃, PBTCs表现出比PBC更高的热稳定性。薄膜拉伸试验结果表明,PBTC30(拉伸强度为33.54 MPa,断裂伸长率为275.69%)和PBTC40(拉伸强度为32.13 MPa,断裂伸长率为294.63%)具有较高的强度和韧性,在薄膜材料中具有一定的应用潜力。     

Extraction and characterization of highly pure alumina (α, γ, and θ) polymorphs from waste beverage cans: A viable waste management approach

The recycling and recovery of important materials from inexpensive feedstock has now become an intriguing area and vital from commercial and environmental viewpoints. In the present work, extraction of different single phases of alumina (α, γ, θ-Al₂O₃) having high purity (>99.5 %) from locally available waste beverage cans (～95 % Al) through facile precipitation route calcined at distinct temperatures has been reported. The optimization of process technology was done by a variety of different synthesis parameters, and the production cost was estimated between 84.47-87.45 USD per kg of alumina powder. The as prepared alumina fine particles have been characterized using different sophisticated techniques viz. TG-DTA, WD-XRF, XRD, FT-IR, SEM, DLS-based particle size analysis (PSA) with zeta (ζ) potential measurement and UV–Visible Spectroscopy. X-ray diffractogram confirms the formation of γ-, θ-, and α-alumina at 500–700 °C, 900–1000 °C, and 1200 °C respectively and crystallite size, crystallinity, strain, dislocation density, and specific surface area were measured using major X-ray diffraction peaks which varies with temperature. The SEM studies showed that the as prepared alumina particles were agglomerated, irregular-shaped with particle size (0.23–0.38 µm), pore size, and porosity were calculated from SEM image. ζ-potentials at different pH values as well as isoelectric point (IEP) of α, γ, and θ alumina were calculated in an aqueous medium which changes with temperature. The direct band gap (E_g) energies were found between 4.09 and 5.19 eV of alumina obtained from different calcination temperatures. The synthesized materials can be used in sensors, ceramics, catalysis, and insulation applications.     

碳酸酯类电解液中Mg(NO3)2添加剂抑制锂枝晶生长的研究

在锂-硫化聚丙烯腈电池体系中,负极锂枝晶的形成和生长严重恶化了电池充放电性能,并给电池带来了安全隐患。而在更有利于稳定正极硫化聚丙烯腈材料的碳酸酯类电解液中,锂枝晶生长尤为严重。本文通过将硝酸镁添加到碳酸酯类电解液中,研究硝酸根和镁离子对锂金属表面改性的共同作用。实验数据发现,在硝酸根和镁离子共同作用下,锂枝晶生长被有效抑制。当硝酸镁浓度为100 mmol·L^-1时,锂铜半电池的库仑效率明显提高,并显著改善了锂-硫化聚丙烯腈电池的循环性能。300次循环后容量保持率为71%,远高于硝酸锂的61%和无添加剂的50%。     

DNA环境中硒代胸腺嘧啶和腺嘌呤碱基对的激发态性质和光物理机理的理论研究

应用高精度的多态完全活化自洽场二级微扰理论方法, 在量子力学/分子力学组合方法的理论框架 QM(MS-CASPT2//CASSCF)/MM下, 系统研究了DNA环境中2-硒和4-硒取代胸腺嘧啶和腺嘌呤碱基对(2SeT-A和4SeT-A)的最低5个电子态(S₀, S₁, S₂, T₂和T₁)的结构、 性质和光物理过程. QM(MS-CASPT2//CASSCF)/MM计算揭示了DNA环境中2SeT-A和4SeT-A碱基对激发态性质和光物理过程差异性的来源, 提出的机理将有助于理解DNA类似物的光物理过程, 在光动力学治疗中具有潜在的应用.     

电解水金属单原子催化剂的研究进展

氢能因其能量密度高、清洁无污染等特点,作为替代化石燃料的能源载体得到了广泛的研究.如何清洁高效地制备氢气受到了大量研究者的关注.当前,以化石能源的热反应所得副产氢气是主要来源.然而,采用该类方法不仅不能摆脱化石能源的使用以及温室气体的排放,还会造成生产氢气的纯度不高,碳氧化物杂质浓度过高的问题,严重影响氢气的后续使用.采用可再生能源(太阳能、风能等)所产富余电,进行电解水制氢,产生的氢气不含碳氧化合物杂质,纯度很高,可以真正实现碳的零排放,被认为是未来氢气来源的重要方式.目前,电解水制氢在制氢市场的所占份额较小,而造成这样局面的主要因素是该过程中的高能耗问题.为了降低能耗,开发高效催化剂加速两个电极上的电解反应的动力学尤为重要.近年,金属单原子催化剂(SACs)因其独特的结构,在很多研究中被用作电解水催化剂,进而开发出大量高性能的金属单原子电解水催化剂.本文综述了近年SACs在电解水催化方面的应用.首先,针对电解水反应本身,总结了阴阳极两侧的电极反应机制以及影响电极催化性能的关键吸附中间物种;然后,根据载体的不同,即合金、碳以及其它化合物将SACs分为三类,总结了相关电解水催化研究现状,并且针对不同类型SACs目前的发展情况,提出了它们各自存在的问题.其次,进一步总结了影响SACs电解水催化活性的因素,提出了四种决定SACs催化性能的影响因子,分别为金属原子的固有元素性质、配位环境、几何结构和负载量;同时讨论了这四类影响因素对SACs催化活性的影响机制,总结了调控各类影响因素的方法,为SACs的设计提出了一些建议.最后,展望了SACs在电解水催化中的应用,探讨了SACs在催化剂设计及催化机制研究方面的问题,提出了SACs在电解水催化中的未来发展方向.     

Electrospun Nanofibrous Adsorption Membranes for Wastewater Treatment: Mechanical Strength Enhancement

Functional nanofibrous membranes fabricated by electrospinning technology have attracted much attention in the removal of heavy metal ions from contaminated wastewater. The high specific surface area, high porosity and ease of functionality create an enhanced throughput and high adsorption capacity of the nanofibrous membrane. However, the relatively poor mechanical properties of the membrane with a non-woven nanofibrous structure are one of the major concerns, which can limit the applications in wastewater treatment. Different strategies and methodologies were explored to address the problems and were reviewed in this work, highlighting the possibilities of overcoming the poor mechanical properties of the nanofibrous membrane and to ensure the recyclability and reusability of the membrane during the adsorption process.     

Reactive Dyeing of Electrospun Cellulose Nanofibers by Pad-steam Method

Based on the functional properties of electrospun cellulose nanofibers(CNF), scientists are showing substantial interest to enhance the aesthetic properties. However, the lower color yield has remained a big challenge due to the higher surface area of nanofibers. In this study, we attempted to improve the color yield properties of CNF by the pad-steam dyeing method. Neat CNF was obtained by deacetylation of electrospun cellulose acetate(CA) nanofibers. Three different kinds of reactive dyes were used and pad-steam dyeing parameters were optimized. SEM images revealed smooth morphology with an increase in the average diameter of nanofibers. FTIR results showed no change in the chemical structure after dyeing of CNF. Color fastness results demonstrated excellent ratings for reactive dyes, which indicate good dye fixation properties and no color loss during the washing process. The results confirm that the pad-steam dyeing method can be potentially considered to improve the aesthetic properties of CNF, which can be utilized for functional garments, such as breathable raincoats and disposable face masks.     

Microwave-assisted Catalyzed Synthesis and In vitro Bioactivity Evaluation of Benzimidazoles Bearing Phenolic Hydroxyl

An efficient and facile method was introduced for the synthesis of benzimidazoles in this paper. The optimum reaction conditions were determined. A series of benzimidazoles bearing phenolic hydroxyl(2a-2t) were synthesized in moderate to excellent yields starting from differently substituted hydroxyl benzaldehyde and 4-position substituted o-phenylenediamine via nucleophilic addition in the presence of catalyst Na₂S₂O₅ under microwave irradiation condition. Herein, effects of the catalyst, molar ratio of reactants, reaction temperature and solvent were investigated. The optimal reaction condition was determined. The effect of DMF and EtOH solvent on the reaction was compared. The synthesized compounds were characterized by FTIR, HRMS, ¹H NMR and ¹³C NMR spectroscopy. Further, the bacteriostatic activities of the synthesized compounds were evaluated with ciprofloxacin and itraconazole as a positive control, respectively. Compounds 2b, 2n, 2q and 2r exhi-bited some antibacterial activity. The lowest MIC of antibacterial activity of compound 2b was 32 μg/mL. Meanwhile, the luminescence property of compound 2b was studied. The antibacterial activity of compound 2b, along with their good fluorescence performance highlighted the potential of these compounds as lead structures and owned fluorescence trace for further study towards the development of novel drugs and functional mechanisms in living organisms.     

Preparation of modified multi‐walled carbon nanotubes as a reinforcement for epoxy shape‐memory polymer composites

Effectively improving the mechanical properties and thermal resistance of epoxy shape‐memory polymers (ESMPs) without affecting their shape‐memory performance is necessary to expand these polymers in practical applications. In this article, modified multi‐walled carbon nanotubes (MWCNTs) were prepared and used as efficient reinforcement for enhancing the comprehensive properties of ESMPs. Increases of nearly 289% to 444% for impact strength and 112% to 184% for tensile force were obtained by adding only 0.1 to 1 wt% epoxy‐modified MWCNTs. The addition of unmodified and carboxyl‐modified MWCNTs was also investigated but showed less impact on the mechanical properties of the ESMPs than epoxy‐modified MWCNTs. Thermogravimetry analysis (TGA) and dynamic mechanical analyses (DMA) showed that less than 1 wt% modified MWCNTs can enhance the heat resistance of ESMPs greatly. Although the shape recovery time for composite materials increased upon adding the MWCNTs, the entire recovery time was still less than 1 minute, and the shape recovery rate was relatively high, nearly 100%.     

锂金属电池用高浓度电解液体系研究进展

锂金属二次电池具有极高的能量密度,是下一代储能电池的研究热点。然而,金属锂负极在传统碳酸酯电解液1 mol·L^?1 LiPF6-EC/DEC(ethylene carbonate/diethyl carbonate)中充放电时,存在严重的枝晶生长和循环效率低下等问题,阻碍了其商业化应用。因此,开发与锂负极兼容的新型电解液体系是目前重要的研究任务。与传统稀溶液相比,高浓度电解液体系具有独有的物化性质和优异的界面相容性,并且能有效抑制锂枝晶生长、显著提升锂负极的循环可逆性,因而格外受到关注。本文综述了高浓度电解液及局部高浓电解液体系的最新研究进展,分析了其溶液化学结构和物化性质,对其与锂负极的界面相容性、枝晶抑制效果、效率提升能力及界面稳定性机制进行了探讨;文章着重介绍了高浓与局部高浓电解液体系在锂金属二次电池中的应用,同时从基础科学研究和应用研究两个层面对高浓电解液和局部高浓电解液存在的主要问题进行了简要分析,并对其未来发展方向进行了展望。